Youth Safety Rails meet the Consumer Products Safety Commission Loft & Bunk Bed Guidelines. Each Safety Rail Set includes safety rails on all four sides with a small opening to enter the bed. The number of safety rails sets needed are: (2) sets for mattresses up to 8" thick and (3) sets for mattresses 9" - 16" thick.

The Safety Rails are also used as a Pillow Stop to prevent pillows from falling off and we add a Pillow Stop to the bottom bunk.

Safety Rail Height Above Mattress: The top of the Safety Rails are positioned 5" above the top of the mattress which follows the Consumer Products Safety Commission guidelines. If you have young children and would like the safety rails to be higher we also offer additional safety rail sets to go 10" above the top of the mattress. You will also need to select the Taller Legs to be able to add additional sets of safety rails.

Leg Height: We have multiple leg heights available based on your ceiling height. If you ordered the Extra Safety Rails you will need to select the next size taller legs. Standard Legs are for ceilings up to 8', Extra Tall Legs for ceilings up to 9'.

We always cut the legs to the proper height based on your specifications.

Headboards and Footboards may be installed at either end. The optional shelves are 5-1/2" deep, they overhang the mattress by 3" and do not interfere with the placement of the pillow or the person sleeping. The shelves are perfect for storing items such as a cell phone, iPod, iPad, glasses, alarm clock, books or a reading light. The Slatted Headboards have 1/2" gap between the slats allowing you to pass your charger cord between the slats to be used as a nighttime charging station.

The headboards and footboards are 20" high. The footboard covers the end of the mattress and goes 5" above the top of the mattress.

Shown here is a bed with the Solid Headboard and Solid Footboard. If you order both a Headboard and Footboard you will need to order either a Angled Front Ladder or Vertical Front Ladder.

Please contact us if you need a custom headboard or footboard built.

Please note the Solid Headboard / Footboard is not available for the king size as it it too large to ship with FedEx.

Top Shelf is placed at the top of the Headboard or Footboard Legs.

This photo shows the Top Shelf with the Slatted Headboard.

Single & Double Shelf Headboards may be used just by themselves or may be combined with the other headboards below. They have a backboard to prevent items from falling out the back. By themselves they do not serve as a Pillow Stop. The Pillow Stop comes with the other headboards below or when selecting the Safety Rails. View the Single & Double Bookshelf Headboard Specs.

Slatted Headboards have 1/2" gap between the slats and also serves as a Pillow Stop. The second photo shows it combined with the Double Shelf.

Solid Headboards also serve as a Pillow Stop. The second photo shows the Solid Headboard combined with the Double Shelf. The Single Shelf may be installed either in the upper or lower position.

Vertical End Ladder: The Vertical End Ladder may be placed at either side of either end. You need about 2 feet of space at the end of the bed to be able to climb up.

Angled End Ladder: We also have an Angled End Ladder which may be attached to the (short) end of the bed. They can be assembled either at the left or right ends of the bed. The angled ladder 2x4 rungs are positioned flat giving you a larger surface area for climbing up and it is much easier on your feet. The Angled Ladder comes pre-assembled and is ready to be attached, is 18" wide and extends out roughly 18" at the bottom. The weight capacity of the standard angled ladder is 200 lbs.

HD-Heavy Duty Ladders: The weight capacity of the HD-Heavy Duty ladder is 300 lbs.

Angled Front Ladder: We also have an Angled Front Ladder which may be attached to the front (long side)of the bed. They can be assembled either at the left or right on the front of the bed.

Angled Ladder Handrails: We also have Handrails for our Angled Ladders. They attach to both sides of the Angled Ladder and it makes it much easier for children climbing up and down.

Ladder Hooks: We have Ladder Hooks available if you need the angled ladder to be easily removable. Please note that the Consumer Products Safety Commission Bunk Bed Guidelines are that ladders need to be screwed to the bed. Hooks are not allowed. If this is going to be used by kids or in a Airbnb/Vrbo/STR or any commercial rental situation, the ladder needs to be screwed to the bed.

Kids love climbing and it makes for great exercise. We offer pipe ladders that can be attached to the rungs of the beds. They are made from 1/2" galvanized pipe. They can not be used with the Angled Ladders. They can be ordered in sets of (4) four (for an 8' ceiling) or (5) five (for 9' or greater ceiling).

For young children needing help climbing up we offer Pipe Grab Handles. They are only available with the Angled Front Ladder and are made from 1/2" galvanized pipe and are 10" long.

The Stairs Steps with Open Cubby Shelves gives you lots of extra storage space and easy to climb stairs. The unit may be placed at either short end of the bed. They are available with either (4) 44" high or (5) 55" high Steps & Shelves. They are available in 16" width. An optional Handrail is also available. The unit is all solid wood.

Please contact us if you need a custom size built or need to have it installed on the Long Side.

Specifications:
16" Width.
(4) Steps is 44" high x 43" long or 53" long.
(5) Steps is 55" high x 53" long or 63" long.
Weight capacity is 250 lbs.

First photo above shows the (5) Step 55" x 63" unit.
Second photo shows the (4) Step 44" x 43" unit on a Full size bed.
Third photo shows the optional Handrail.

The L-Shaped Bed is a combination of two separate beds with a Connector between them joining the two beds together. This eliminates the center post giving you a larger open area underneath. The two individual beds may be a combination of loft or bunk beds.

To make a L-Shaped bed you need to select the Connector for the first bed only. The second bed ordered does not need the connector. The first bed in the shopping cart will be considered Bed #1 and the second bed will be Bed #2. If you have any custom specifications you can enter them after checkout.

L-Shaped Beds are perfect for kids sharing a small bedroom where two separate beds will not work out. You can also use one section as a bed and the other for a reading or play area. For a Play Area we will need to add a plywood platform to the top of the bed slats to form a solid top surface. You can then cover it with carpeting or foam mats to make it a nice soft play area. For example, Bed #1 could be a Queen Loft or Bunk Bed for sleeping and Bed #2 a twin for sleeping, a play or reading area.

How much space will it take up in the room? Using the diagram you can calculate how much space you will need depending on the size beds you are ordering.
Bed Outside Dimensions: Width: Twin 44" Full 59" Queen 65" Length: Regular 79" XL 84".

The first diagram shows a Left L-Shaped Bed and the second diagram shows the Right L-Shaped Bed.

This photo shows a Right Side L-Shaped Bed with Bed #2 (a loft bed) on the Right side of Bed #1 (a bunk bed).

Corner Braces: For most of our standard beds, Corner Braces are not required. However if you have customized it to make it taller or longer or if you want additional bracing then Corner Braces may be added. Also some colleges require all beds to have Corner Braces. The Corner Braces go on the long sides.

Customization or Additional Shipping Charge: If you have a Customization or an Additional Shipping charge you may add it to your shopping cart here. After checkout you may enter any Custom Specifications or Order Comments details.